Leading 10 common forklift accidents ， forklift procedure should take note of these matters ！.

Leading 10 common forklift accidents ， forklift procedure should take note of these matters ！.

Blog Article

Do not underestimate the forklift at the workplace. If the operation is not good, there will be major mishaps in mins, and there are lots of crashes entailing forklifts.

Instance 1: The forklift freight obstructed the driver's view, and the individual ahead can not be located, causing a moving crash.
Instance 2: In order to keep the equilibrium of the forklift when raising hefty products, the workers used their body weight as the counterweight, which practically caused casualties.
Case 3: The width of the forklift freight goes beyond the permitted width of the path and hangs on the roadside rack, which virtually creates an mishap.
Situation 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a seat belt and fell from the lorry when it surrendered and was crushed.
Forklift operation need to take note of these issues ：.

Start.
1. Prior to starting, observe the surroundings, and after verifying that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge must be risk-free before starting.
3. When the forklift begins with a tons, the driver must first confirm that the load is stable and dependable.
4. The beginning needs to be slow and constant.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast needs to be tilted in reverse. .
2. Do not lift the fork too expensive when driving. When entering and leaving the work site or while driving, take care that there will be no challenges in the sky. When the tons is taking a trip, the fork should not be elevated too high, which will certainly affect the stability of the forklift. .
3. After unloading, the fork must be lowered to the typical driving placement prior to driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal should be provided initially. High-speed doglegs are restricted. High-speed doglegs will create the vehicle to shed side security and topple. .
5. When the forklift is downhill, it is strictly forbidden to switch off the fire and slide, and it is forbidden to brake unexpectedly while driving with tons unless there are unique circumstances.
6. When the forklift is running, it should follow the website traffic rules in the manufacturing facility and should keep a specific safety distance from the car ahead. .
7. When the forklift is running, the tons needs to be in the lowest position that does not hinder the driving, and the gantry ought to be appropriately slanted back. The lots will not be raised other than when piling or filling. .
8. The elevation of the tons have to not obstruct the motorist's view. In unique conditions, when the item influences the forward vision, drive at a low speed when reversing.
9. It is forbidden to turn on the ramp, nor to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it should drive safely at a reduced rate when getting in the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is forbidden for personnel to depend on the fork to hold things and play a stabilizing role. .
12. If issues are found, they will certainly be fixed and reported in a timely manner, and they will certainly never ever operate with health problems or conceal them.

packing and unloading.
1. When fork-loading things, the distance in between the two forks should be readjusted as needed to make the load of the two forks well balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is restricted to deal with a single fork or make use of a fork top or Stand-on Electric Pallet Stacker pull. In unique conditions, security warning signs need to be set up to advise surrounding pedestrians. .
3. In the process of loading and dumping products, the forklift must be stopped with the brake. .
4. The speed of the automobile ought to be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and injure people. .
5. When making use of a fork to fork the goods, the fork must be as deep as feasible under the load, and it ought to be kept in mind that the fork suggestion need to not touch other Electric Forklift Truck for Warehouse products or objects. The tons should be supported with marginal back tilt of the gantry so that the tons does not slide in reverse. The mast can be slanted onward slightly when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is prohibited to fork items at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so as to prevent the collapse of the goods and injure individuals. .
8. Overwhelming is forbidden, and it is banned to use forks to lift workers to participate in high-altitude procedures to stay clear of high-altitude falling mishaps. .
9. It is not permitted to utilize the brake inertia to slip, place, round or roll things. .
10. It is not permitted to use forks to pick, turn pallet dump.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Pull the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not exceed 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance should be checked, and gas, lubricating oil and cooling water should be included.
2. Examine the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the procedure of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leak must likewise be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to check prior to leaving the vehicle;.
2. When you encounter a person before you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The transforming should not be also sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope ought to be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is greater than 10%, the automobile should be driven in reverse when going downhill;.
8. When the forklift employees carry the goods and progress, if they encounter huge or heavy products and most likely to the motorist's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to exile round or easy-to-roll things.
7. It is not allowed to bring people to work with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Car parking is not permitted under the list below problems.
1. Curves, narrow roadways, train crossings;.
2. Sections with a longitudinal slope more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844